BestReviews is reader-supported and may earn an affiliate commission. Details
Comes with easy-to-follow instructions. The pieces are simple to use and add versatility that others often lack. Easy to do the job in a really quick fashion once you know what you are doing.
Metal pry tool can bend under extended pressure.
On a budget, this will be good to take care of small dips in a variety of places. Tools provided are easy to use. Golden lifter is impressive at the price point. Comes with a nice bag for easy transport.
Isn't suited for bigger blemishes or those on a corner.
This dent repair kit is effective at removing shallow problems. Has a variety of shapes and sizes of tabs. Environmentally friendly, with no chemicals involved.
Some of the tabs break easily after use.
The T-design makes this option easier to use and operate with precision. The high-carbon steel will withstand many uses. All it takes is some light prep, hot glue, and grace to fix most surface-level dents.
Some may be averse to using hot glue on their paint; make sure you're ready.
An affordable way to fix small surface dents without any paint or surface damage. All you need to do is press it against the dent and pull up with up to 110 lbs of force. Buyers praise it against minor dents.
It's not as comprehensive as most other kits are.
We recommend these products based on an intensive research process that's designed to cut through the noise and find the top products in this space. Guided by experts, we spend hours looking into the factors that matter, to bring you these selections.
Until relatively recently, repairing a vehicle body meant beating out the dents with a hammer, filling, sanding, and repainting. It was a complex, time-consuming, and expensive project. Today’s paintless dent repair (PDR) has numerous advantages. It’s equally effective but much faster, so it saves you time and money.
The paintwork is also preserved in the majority of cases, making it environmentally friendly because there’s no need for filler or paint. The biggest advantage, however, is that you don’t need to take your car to the body shop. You can do the work at home. All you need to get started is a good dent repair tool kit.
The process is fairly straightforward, which is why you don’t need to be a highly-skilled body shop technician to produce professional results.
Clean the area with rubbing alcohol.
Glue a “tab” onto the center of the dented area using hot glue (which doesn’t damage the paint).
Attach a “puller” to the tab (its rubber feet won’t damage the paint).
Apply pressure to the handle, pulling the steel back into place.
Remove the tab.
Clean the area with rubbing alcohol. In many cases the repair is invisible.
There are a few variations in the tools used, which we’ll discuss in a moment, but basically, it’s as easy as that. So why haven’t we always had these kits? There are two reasons:
Thinner steel: Modern vehicle body panels are made from steel that’s thinner but of better quality. It’s more malleable, so it doesn’t require brute force to fix.
Many dent repair tool kits contain a puller, tabs, hot glue gun, glue sticks, and scraper. More comprehensive or expensive kits may include a few other items.
Bridge puller: This is the most common — even the cheapest kits usually contain a bridge puller, which can create considerable force. A central threaded knob does the actual pulling.
Gold puller: This type is so-called because — for reasons we don’t know — they’re almost all gold colored! Mid-range kits include this type. These have two levers that are squeezed together. They can be quicker than bridge pullers, and it’s easier to vary the power, but unless you have phenomenal grip, they don’t exert the same maximum force.
There are two types of tab: plastic and threaded. Some kits have both, but many just have plastic, which is easier to use. The advantage of threaded tabs is that they allow more power to be exerted, though they only fit specific threaded bridge pullers. It’s important to use a tab that best suits the size and shape of the dent you’re working on, so it’s generally a case of the more the merrier.
Hot glue guns: These range from 40 watts to 100 watts. We would always err on the side of more power because the gun is ready sooner and it melts the glue more thoroughly. If the glue isn’t melted properly, the tab will just fall off the body, which is very frustrating.
Scraper: One or more plastic scrapers should be included for cleaning up.
Bottle: You should also get a spray or pump bottle. You’ll have to supply the rubbing alcohol.
Cloth: A kit might include a cleaning cloth.
Gloves: Some kits include gloves.
Hammer: Better dent repair tool kits include a hammer (one metal face and one rubber face) which can be used with tap-down heads to work on areas that are sometimes raised up farther than you need during the pulling process. Alternatively, a specific tap-down hammer might be supplied.
LED lamp: This is occasionally provided. The idea is to shine light across the body panel to identify low spots. Not all of the lights are as effective as they could be, and a flashlight can perform the same function, so it’s not something we’d worry about.
Storage: It’s always nice to have a carryall to put everything in, but you don’t always get one.
It’s important to look for quality components and a reasonably powerful glue gun. That said, prices are largely defined by the number of pullers and other components in the kit.
Inexpensive: Cheap dent repair tool kits start at just over $10, but these probably only come with a bridge puller and a very limited set of tabs. Some don’t even include a glue gun. If you’ve got one dent to fix, you’re not really wasting any money, but we’d be inclined to pay a little more.
Mid-range: Spend between $30 and $60 and you have an enormous choice. The majority of kits fall in this bracket and provide adequate solutions for most users.
Expensive: High-end kits start at around $80 and can run to $160. Given their comprehensive nature, these still represent good value. It really depends on how many tools you need and how often you have dents to repair.
Assess the damage first. If the paintwork is scratched or cracked, this kind of dent repair kit can make the situation worse. You’ll need to decide whether you can live with a touch-up paint job or it’s time to take your vehicle to a professional body shop.
Work in the shade. The temperature should be between 60°F and 80°F. If it’s too hot, the glue won’t set fully.
Clean the area thoroughly with rubbing alcohol. You need to remove wax, grime, or grease so the glue can stick to the surface properly.
Stick all the tabs on at the same time if you have several dents. Wait five minutes for the glue to set, then pull each in turn.
Be patient and thorough. Though the process is known for its speed, that’s in comparison with the traditional filling, sanding, and repainting process. Professionals tell us that paintless dent repair takes half an hour or longer. If there’s more than one dent, it could take several hours.
Be careful tapping down raised areas. Pulling irregular dents can result in some areas coming up higher than the surrounding surface. That’s when your tap-down hammer comes into play. The poly heads transmit force without damaging the paint, but you need to be careful. Use lots of light taps. Excessive force could create new dents and you’ll have to start over.
Q. Can paintless dent repair really remove dents completely?
A. It depends on the severity of the dent, but yes, with care and patience, panels can be returned to their original condition. Modern vehicles have very flexible paint, so as long as that’s intact, the repair can be invisible. One specialist we consulted said around 95% of dents can be successfully treated using this method.
Q. Is there a maximum or minimum size of dent that can be repaired?
A. It’s not an easy question to answer because it depends on where and how deep the dent is. Common problems like door dings and hail damage are very fixable. Damage to panel edges is difficult because of access and the thickness of the steel. Very small but deep dents can be problematic. However, given the cost of dent repair kits compared to what a body shop charges, almost anything is worth a try!
Q. Can I just push or hammer a dent out from behind or use one of those suction pullers?
A. You can try, but it’s not something that’s recommended. A very large, shallow dent might pop out, but the method isn’t precise, and the results are often disappointing.
Get emails you’ll love.
Learn about the products you’re wondering if you should buy and get advice on using your latest purchases.