Extends up to 55". Lots of happy customers who have owned over several winters. Brush pivots to get into hard-to-reach spots.
A few owners don't like the swivel because it moves when they don't want it to. Large.
Edge works well making snow and ice removal fast and effective. Handle feels solid.
At only 11 inches, it doesn't add much length to your reach.
Solid steel provides the strength to break through layers of ice. Designed for sidewalks, car tire areas, and porch stairs.
Not meant for use on windshields.
Long length gives extra reach, especially for wide windshields. Brush removes top snow; scraper isn't the best we've seen but gets the job done.
Scraper should not touch car paint, as it could leave a mark.
We recommend these products based on an intensive research process that's designed to cut through the noise and find the top products in this space. Guided by experts, we spend hours looking into the factors that matter, to bring you these selections.
Ice, snow, and frost removal are chilly winter tasks that many people cannot avoid. With the right ice scraper, however, you can clear your windshield and get on your way without delay.
Not all ice scrapers are the same, and depending on the winter conditions in your area, you may need one with specialty features like a brush or squeegee. If you’re not sure what you need, you’ve come to the right place.
A standard ice scraper has a handle and a straight-edged blade. The blade may be double-sided with an ice pick on the opposite side. This type of ice scraper works best for most conditions, though you may need to remove heavy snow from the windshield before scraping.
If you live in an area that gets frequent heavy snow, you may need a scraper with a longer handle to prevent heavy, built-up snow from falling on you as you scrape your windshield.
Long-handle ice scrapers have an extended arm with a blade at the end. There’s a great deal of variation in handle length and design with this type of scraper. Some models have a curved handle to give you better leverage; others have a retractable handle that can be adjusted to different lengths. Some may have a blade only, while others may have a blade on one end and a brush or squeegee on the other.
The arm of a long-handle ice scraper should be solid and well-made so it doesn’t easily break when you’re scraping thick ice or frost. This type of scraper works best if you’re trying to reach the center of a large windshield.
The handle of this type of ice scraper is encased in a protective mitt to keep your hand dry. Some mitts are insulated and others aren’t, which means you may need extra protection for warmth. Most ice scraper mitts do not have a long arm, so they work best for small vehicles and windshields.
Electric or heated ice scrapers plug into the cigarette lighter of your vehicle. As they heat, they melt and scrape ice off the windshield. Unfortunately, these models have not traditionally performed well. They do not heat quickly, nor do they get hot enough to do much more than a standard ice scraper. Notably, you must keep your window open while using an electric ice scraper.
A snow broom is an ice scraper with a long handle and brush or broom head on one end. Some have a curved handle to get better leverage when scraping tough ice and snow. The broom or brush is used to sweep off heavy snow to get to the underlayer of ice. Those who live in areas with frequent heavy snow will find this tool to be one of the best options.
Here are some of the most important features to consider when choosing an ice scraper.
Arm length varies; there are ice scrapers that have no arm, and there are ice scrapers that are basically full-size brooms with a scraper on one end.
To determine what you need, consider the size of your vehicle and the size of your windshield. Larger windshields and vehicles need a longer scraper. You might also need a longer handle if you’re shorter than average.
Some ice scrapers have an extendable arm that allows you to adjust the length. The durability and construction of the arm must be of high quality with these models, because you may have to put a lot of pressure on the arm to remove thick ice. Look for extendable arms with locking mechanisms so the arm doesn’t retract while you’re scraping.
Ice scraper blades are usually between five and 11 inches wide. That said, the ice scraper with the widest blade isn’t always the most efficient tool. A blade that is too wide spreads out the pressure, causing you to work harder to remove ice and snow. Ice scrapers with small to medium blades tend to work best, as they concentrate the force applied and make each stroke count.
Not all ice scrapers have a brush, but those that do often have an ice scraper on one end and a brush on the other. A brush may have bristles or a foam head, but regardless of composition, it helps remove heavy snow so you can reach the ice layer closest to the windshield.
A squeegee comes in handy if you live in a cool, wet climate. Sometimes it’s necessary to scrape and then squeegee off the remaining slush or soft ice. Some squeegees are located on the blade head and can be used by flipping the blade over. Others may be located on the side opposite the blade.
With particularly thick ice, you may need an ice chipper to break through to the windshield. Ice chippers are often located on the opposite side of the blade head.
In cold winter conditions, an ice scraper with a good grip can make all the difference in your ability to remove tough ice. A scraper with a soft, rubberized grip creates more traction than a plastic contoured grip. If you wear thick winter gloves, traction and grip are especially important.
Inexpensive: For less than $10, you can find a mitt ice scraper or a basic ice scraper with a squeegee or brush.
Mid-Range: In the $10 to $20 range are ice scrapers with foam or rubberized grips, long-handle models, and a few ice scrapers with extendable arms. Some models may have a squeegee or broom. Electric ice scrapers are also found at this price point.
Keep an ice scraper in every vehicle you own. That way, you won’t get caught away from home without a way to remove ice or snow from your windshield.
It’s fairly easy to find a place to stash your ice scraper. For example, a small ice scrapers could easily fit in a glove box or in the small storage bin found on the door of some vehicles.
Q. I’m not very tall. What kind of handle shape should I look for to get good leverage when scraping?
A. Even if you’re of average height, getting good leverage on the windshield of a large vehicle can be difficult. Extendable handles allow you to adjust your reach, but the handle shape also plays an important role. Curved handles offer extra leverage, but you may have to sacrifice length for the ability to apply more pressure. The longer the handle, the easier it can bend when trying to remove thick ice and snow. Medium-length handles with a curve offer a good combination of leverage and durability for tough ice removal.
Q. Will an ice scraper scratch my windshield?
A. Ice scrapers are usually made of hard plastic that’s designed to protect the surface of the windshield. Notably, there are ice scrapers designed to remove ice from sidewalks and other rough surfaces. These ice scrapers should not be used on windshields, as they could scratch the glass.
Q. Can I use an ice scraper to scrape ice off the body of my car?
A. An ice scraper is designed to remove ice from a windshield, not the body of a car. The scraper could scratch the paint on your car, especially if you were to slip while using it.
Ice scrapers with a foam broom head can sometimes be used on the body of a car, but you should check the manufacturer’s instructions before doing so.