Emits impressive illumination–up to 500 lumens on high setting. Rechargeable with 4 brightness settings and comes with a taillight. Easy to install. Water-resistant. Excellent support from the manufacturer when issues arise.
Some inconsistencies when it comes to battery life–some last longer than others. A few reports of failure within a few months.
Very bright LED light with 3 settings: flashing, steady, and rapid. Great for late night hikes or walks, as well as bike rides. Works well in all weather conditions. USB-accessible charging feature.
Clip may secure too loosely to helmets and need replacement.
A reasonably priced headlight/taillight set with straightforward design and installation. Provides LED with 4 settings including fast/slow flashing modes. Long battery life. Waterproof.
A few reports of strap breakage and failure to charge. Not quite as bright as models with lumen ratings.
Offers bright illumination with 4 settings. Offers 320 lumens in a water-resistant build. Reaches full power fast in just 2 hours. Easy to install, and comes with a taillight.
Charge doesn't last very long on flashing mode. Some reports of failure after a few months' use. Customer service isn't very responsive.
A headlight/taillight set that produces LED illumination. Headlight is visible up to 1,500 feet and taillight up to a 40-foot range. Offers 3 settings. Weather-resistant, easy to install, and budget-priced.
Requires 6 AAA batteries, but you get up to 100 hours. Taillight could be brighter. Doesn't work as well as competitors in total darkness.
We recommend these products based on an intensive research process that's designed to cut through the noise and find the top products in this space. Guided by experts, we spend hours looking into the factors that matter, to bring you these selections.
Along with a properly fitted helmet and a good understanding of the rules of the road, bicycle lights are a crucial element for safe cycling. You need to see and be seen to avoid accidents, and your bike’s lights play a major role in your ability to do so.
On today’s market, there are lots of different bike lights to choose from. How do you decide which lights are critical and which are optional?
If you’re ready to light up and get riding, check out our five recommendations. If you’d like to learn more about bicycle lights in general, including how to choose them and ride safely, read on.
Bike lights fall into two general categories: lights that help you see and lights that help others see you. Below, we examine the different types of lights a bike rider can use to protect himself, from headlights to helmet lights.
A front light, or headlight, is your bike’s equivalent of car headlights. Bike headlights help you see what’s up ahead and to your sides when you’re biking in dim or dark conditions. Of course, your headlight also helps make you more visible to others – particularly motorists who are driving in the opposite direction.
Bike headlights are much more intense than bike taillights and have a somewhat narrower beam. They also require a higher level of battery power. Most bike headlights mount to the handlebars.
A good bike headlight has multiple settings, so you can tailor the light to your surroundings and the level of light you’re in. At a minimum, your light should have the following settings.
A low or regular intensity setting
A high beam for riding in especially dark areas
A flash or pulse setting (so you’re more visible during the day)
Bike safety lights help other people – particular motorists – see you in dim or dark conditions. But many studies suggest that it’s best to use your safety lights even when riding during the day if you’re in a high-traffic area.
Safety lights are mounted on the back of the bike, usually directly below the seat or on the back of the bike rack. Some riders also attach safety lights to the bike frame or spokes.
Your taillight is your most important bike safety light. In fact, many states require bicyclists to use them. Most are red and have two settings: a steady beam and a flashing pattern, the latter of which is the best choice when riding at night. Your taillight should be visible to motorists both behind you and to your side.
While not absolutely necessary, it’s a good idea to have supplemental safety lights if you typically ride on busy roads or in low-light conditions. Bicycle frame lights come in a variety of colors, so you can add a dash of quirky style along with safety to your bike. Frame lights usually attach to the bike frame between the wheels.
Spoke lights are lots of fun, especially for kids. These small-but-intense lights may come in packages that fasten all the way around the bike wheels or as just one or two lights that clip to a couple of spokes. Either way, as the wheels turn, the lights blur into what appears to be a steady stream of light. Some spoke lights can even be programmed to create intricate patterns as the wheels spin, greatly increasing not only your safety, but also your style factor.
Bike helmet lights are another optional type of safety light that we highly recommend. These lights clip to, clamp on, or slip over your helmet. Many have a white light on the front and a red light on the back so you get a bit of extra illumination on the road, along with increased visibility to motorists. Most helmet safety lights can be set on a steady or flashing pattern.
It’s hard to discuss bike lights without defining lumens and beam patterns, as these two concepts are very important when choosing the best bike light for your needs.
A lumen is basically a unit of measurement for the amount of light that strikes the object you want illuminated. While it’s a bit more complicated than this, it’s easiest and most familiar to think of lumens as the intensity or brightness of your bike lights. The higher the number of lumens, the brighter the light. This is especially important when choosing a bike headlight – or if you often travel off-road paths.
You can use the following statements about lumens as a general guideline.
Safety lights are typically in the 25- to 100-lumen range. That’s just enough to make your bike visible to motorists, but it’s not enough to light your way, so only consider a light in this range if it’s going on your bike’s rear, frame, or spokes for safety purposes.
If you typically ride on well-lit paths or roads and just need a little extra light, you’ll probably find a headlight in the 100- to 300-lumen range to be sufficient. Going much beyond that while riding in mixed traffic could blind oncoming motorists, greatly increasing your chance of an accident.
Mountain bikers, off-road enthusiasts, and those who ride at night or on poorly lit roads needs much more intense headlights. Generally, you’ll want at least 400 lumens, although many headlights specifically marketed for mountain bikers are much brighter than that. (Some go well beyond 1,000 lumens.) For the sake of comparison, consider that the typical car headlights emit roughly 700 lumens on low beam and 1,200 lumens on high.
Beam pattern refers to how widely a bulb casts its light. A spotlight, for example, focuses in a narrow but long beam pattern, while a flood light spreads illumination over a wider, yet shorter, path. Your best choice of beam pattern depends, to a great extent, on where and how you ride. For some cyclists, owning two light sets with different beam patterns can be beneficial.
The average commuter cyclist who rides on surface streets or fairly smooth paths does best with a headlight that has a fairly tight beam pattern. This means there is less peripheral illumination, but the light shines further ahead. Mountain bikers and others who ride in rugged conditions fare better with a light that has a wider beam pattern, making it easier to spot potholes and other trail hazards.
How will you mount your new bike light to your bicycle? Most bike lights fasten with a screw or clamp to the handlebars, seat back, frame, or spokes. Many small safety lights fasten with Velcro. Some high-output headlight systems have clips that make it easy to remove the light when leaving your bike. This deters theft.
While bike light mounting clamps are normally adjustable, and thus fit the majority of bike frames, it’s always best to confirm that any light kit you’re considering fits your specific bike model.
Bike lights all run on batteries, but which kind of batteries will you need? Small safety lights for the spokes, frame, and back of the seat typically run on regular disposable or rechargeable batteries. However, headlights often include a USB cord so you can recharge the batteries over and over again from your computer or other USB-ported device. This applies to high-output headlights in particular.
Bike lights generally hold a charge for a long time, but if you ride extensively at night, look for a light with an extra-long run time. Keep in mind, too, that high-output lights tend to take several hours to recharge.
How much do bike lights cost? Most casual bicyclists purchase their bike lights as a headlight/taillight set. These sets range in price from less than $15 to over $50.
For the average commuter cyclist, spending around $25 will get you bright, dependable lights with plenty of battery life and solid clamps.
If you are a mountain biker and need high-output lights for night riding or trail use, expect to spend $40 or more for higher-lumen lights.
Spoke lights generally cost less than $15.
You ca find good helmet lights for less than $20.