This heater is safe around children and pets. It starts and stops without the excessive popping or pinging common to other baseboard heaters. The fanless heat warms the room evenly and comfortably. It won’t circulate dust and allergens.
The controls, which are hidden on the bottom, may sometimes stick and be hard to turn.
Uses convection to circulate air. Simple installation. Quiet operation. Steel sheathed heating element and steel construction ensure the baseboard heater is built to last.
Requires a thermostat, which is not included.
Electric heating element converts 100% of used power into usable heat. Includes a full-length safety circuit for added protection. Rugged steel construction. Ideal in a bedroom or living room.
Runs slowly. Won't necessarily provide sufficient heat for a large room.
With two heat settings and a built-in thermostat, this little heater is a reliable option for small rooms. Heats quickly on either heat settings and can complement an insufficient central heating system.
Some customers were underwhelmed by this unit's output.
Gentle heat keeps radiating even after the thermostat is turned off. Hydronic element reduces on-off cycling to lower energy use. Large reservoir maximizes the volume of heat storage fluid.
More expensive than many other baseboard heaters. May make crackling or popping sounds.
Though common in older homes, most new homes do not use baseboard heaters for heating. Modern apartments usually don’t have baseboard heaters either. If you’re replacing a baseboard heater in an older home, that’s one thing. But why would you install baseboard heaters in a new apartment or house?
The answer is zone heating. Zone heating is using small heaters for the purpose of heating a particular room or area of the house, called a zone. Whereas central heating systems cover the entire house, a zone heater restricts the heat to a small area. This allows you to lower the thermostat for the rest of the house while still remaining comfortable in the den or living room where you and your family spend the majority of your time. The result will be a noticeable reduction in your heating bill.
What kind of baseboard heater is right for you, though? The answer depends on several factors, including the size of your house, the number of windows, and the floors you have. Our buying guide covers everything you need to consider when shopping for baseboard heaters, and you’ll find our top five picks in the matrix above.
When children grow up and move out, parents are left with an empty nest. They’re also left with unused rooms that don’t need to be heated. If you have a large house with unused rooms, you’re a good candidate for using baseboard heaters to warm one or two rooms in the house. That way you can turn down the central heating to save on energy costs.
Large, drafty rooms don’t always have enough forced air vents to properly warm them in the winter. Or the vents may be badly placed because the house has undergone renovations since the central heating was installed. In either case, properly placed baseboard heaters can maintain a comfortable temperature in large rooms without having to bundle up in sweaters and blankets.
The more windows there are in a room, the colder the room will be in the winter. Even double-pane glass can’t fully keep out the cold. Large picture windows are the worst offenders. They provide you with a great view, but they allow a tremendous amount of cold into the room as well. Often the only way to properly heat a room with many windows is to turn the central heat up so high that it is sweltering in the rest of the house. Baseboard heaters are an ideal solution because they can warm just that room without overheating the rest of your home.
Electric baseboard heaters have interior heating coils and fins that heat the air around them. The air rises, and the heater draws in cold air in its place, which is then heated. All-electric baseboard heaters are generally inexpensive, quiet to operate, and easy to install. Their maintenance requirements are low, but they can cause burns if you, your children, or your pets get too close to them.
In these heaters, electricity warms up a tube or reservoir of water or oil. The fluid circulates through the tube and radiates heat into the room. The oil or water retains heat longer than the metal fins of an electric heater, therefore electric/hydronic baseboard heaters are more cost-effective and efficient. Conversely, it takes a hydronic heater longer to warm up. That said, there is less of a fire hazard with electric/hydronic heaters than with all-electric heaters.
Single-pole thermostats: Stelpro Single-Pole Electric Heater Wall Thermostat
Baseboard heaters don’t always come with thermostats, requiring you to purchase one separately in order to control the heater. There are two types of thermostats, and you’ll need to get the correct one for your heater. Single-pole thermostats, like this Stelpro model, have two wires.
Double-pole thermostats: Honeywell Manual 4-Wire Premium Baseboard Thermostat
If your baseboard heater has a four-wire connection, you need a double-pole thermostat that also has four wires in order for it to function correctly. We like this easy-to-install Honeywell double-pole thermostat.
Heat Covers: Cover-Luxe Baseboard Heat Covers with End Caps
For new or existing baseboard heaters, metal covers provide protection from the heat so children and pets don’t burn themselves. Covers also help prevent a large buildup of dust inside the heater. These baseboard heat covers from Cover-Luxe come in four different lengths, and end caps are included.
The least expensive baseboard heaters are around $30 to $50. These are electric heaters that are three to four feet long.
Mid-range baseboard heaters cost $50 to $150. These are higher-quality electric baseboard heaters that are over four feet long.
Any baseboard heater over $150 is a premium model. This is where you’ll find electric/hydronic baseboard heaters. Their added complexity increases the price.
We like the Cadet Manufacturing 120-Volt Hardwire Electric Zone Heater. The high-quality, powder-coated finish on the 23-gauge steel stands up to nicks and scratches for a long life. This baseboard heater is quiet and heats up quickly. You will have to buy a separate thermostat to go along with this unit, and it is best installed by a qualified electrician. We also like the Dimplex Linear Convector Baseboard Heater. Designed to be installed by a professional electrician, it has a shark-fin design on the heating element to improve heat transfer and extend the unit’s life. The wiring is positioned so it can be run to either end of the heater for installation. The 22-gauge steel is rugged and durable as well.
Q. Should I vacuum my baseboard heater?
A. Yes. Regular vacuuming will prevent the heater from creating a burned dust smell when turned on after a prolonged period.
Q. Should I put heat covers on a baseboard heater if I have children?
A. Yes. Small children are curious about their surroundings and haven’t learned to be afraid of much. Consequently, they’ll stick their hands into any place they can. Heat covers will keep them from burning their hands and fingers on a baseboard heater. Covers will protect your curious pets, too.
Q. What is the best location for a baseboard heater?
A. Baseboard heaters should be installed under windows. Windows are always the coldest part of any room. The cold air coming off a window will sink toward the floor and spread out across the room unless it is immediately heated. A baseboard heater under the window will heat the sinking cold air, thus keeping the room warmer than if the heater were positioned somewhere else.
BestReviews wants to be better. Please take our 3-minute survey,
and give us feedback about your visit today.